Complete Set of CAMPUS® Data, ASTM Data, Biopolymer Database, Application Database, Tradename Database, Literature Database, Toolbox.

Material datasheets available free. Online registration at: www.materialdatacenter.com

Material Data Center is a leading international information system for the plastics industry. Material Data Center offers a comprehensive plastics database, calculation tools, CAE interfaces, a literature database and an application database. For more information about Material Data Center visit www.materialdatacenter.com.

This is the free Material Data Center Datasheet of Ultramid® B33 L - PA6 - BASF

Material Data Center offers the following functions for Ultramid® B33 L:
unit conversion, PDF datasheet print, comparison with other plastics

Check here, which other Ultramid B datasheets, application examples or technical articles are available in Material Data Center

Use the following short links to get directly to the properties of interest in this datasheet:
Propriedades térmicas - Outras propriedades - Propriedades específicas do material
Any use of this information falls under the rules of our disclaimer.
Propriedades térmicasValorUnidadeMétodo de ensaio
ISO Dados
Temperatura de fusão, 10°C/min 220 °C ISO 11357-1/-3
Outras propriedadesValorUnidadeMétodo de ensaio
Absorção de água 9.5 % Sim. to ISO 62
Absorção de umidade 2.6 % Sim. to ISO 62
Densidade 1140 kg/m³ ISO 1183
Moisture Content 0.06 % -
Bulk density 780 kg/m³ -
Propriedades específicas do materialValorUnidadeMétodo de ensaio
ISO Dados
Índice de viscosidade 195 cm³/g ISO 307, 1157, 1628
Características
Processamento
Extrusão de laminas
Forma de entrega
Granulos
Aditivos
Lubrificantes
Certifications
Contacto com alimentos, Aprovação de alimentos FDA 21 CFR
Aplicaciones
Monofilament
Disponibilidade regional
América do Norte, Europa, Ásia Pacífico, America Centra e do Sul
Disclaimer
Copyright Altair Engineering GmbH. Altair Engineering GmbH assumes no liability for the system to be free of errors. The user takes sole responsibility for the use of this data under the exclusion of every liability from Altair Engineering GmbH; this is especially valid for claims of compensation resulting from consequential damages. Altair explicitly points out that any decision about the application of materials must be double checked with the producer of this material. This includes all contents of this system. Copyright laws are applicable for the content of this system.
Created: Source: www.materialdatacenter.com


Material Data Center is provided by M-Base Engineering + Software GmbH. M-Base Engineering + Software GmbH assumes no liability for the system to be free of errors. Any decision about the application of materials must be double checked with the producer of this material.

Additional information about this material, like producer contact address, etc. can be found at www.materialdatacenter.com. For access to this extra information a registration is requested. Free online registration is available.